Log in

Baby Lotion Formulation

image

Raw Materials - % By Weight

  1. Phase A
    • Deionized water - 79%
    • Glucam E-20 methyl gluceth-20 - 5%
    • Glucamate SSE-20 methyl gluceth-20 sesquistearate - 1.2%
    • KELTROL T xanthan gum - 0.5%
    • Magnesium aluminum silicate - 0.5%
    • Methylparaben - 0.2%
  2. Phase B
    • ​​​​​​​Light mineral oil - 7%
    • Cetal cetyl alcohol - 3%
    • Cosmetic AA lanolin, USP - 2%
    • Glucate SS methyl glucose sequistearate - 0.8%​​​​​​​

Preparation:

  • Pre-mix KELTROL T and magnesium aluminum silicate.
  • With vigorous agitation, hydrate the gums in deionized water that has been preheated to 170F. Mix 10-15 minutes.
  • After the gums are fully hydrated, add the rest of Phase A maintaining heat at 77C (170F).
  • Combine Phase B ingredients and heat to 77C (170F) until melted.
  • Combine both parts at 77C (170F).
  • Allow cooling under medium agitation.
  • Add fragrance to suit.

Characteristics:

  • Good Moisture Locking properties.
  • Smooth on skin
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to the accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Continued use of this website infers acceptance of this disclaimer.